MasterKure 220WB

An aqueous polymer dispersion for curing concrete surfaces

How does MasterKure 220WB work?

MasterKure 220WB is non-degrading, membrane-forming, aqueous polymer dispersion suitable for spray application to stripped concrete and freshly placed concrete. The resultant film retains sufficient moisture in the concrete to ensure full hydration of the cement essential for optimum strength development. The cured concrete is typically harder and exhibits a dust free surface with a reduced incidence of drying shrinkage cracks.
When applied to floors, the MasterKure 220WB seals and dustproofs the surface, eliminating the primary source of abrasion and enhancing durability.

What is MasterKure 220WB used for?

MasterKure 220WB is suitable for all cementitious materials where complete water retention is required. It should be applied on matt dry and stripped concrete surfaces.

  • On construction site, for bridge construction, high-rise construction and underground construction
  • For precast concrete and concrete flooring

What are the benefits of MasterKure 220WB?

MasterKure 220WB dries quickly and leads to a dense water retentive membrane. Additionally, the membrane acts as a primer system for many subsequent surface finishes like tile adhesives, paint systems and cementitious systems that do not rely on penetration for substrate bond. MasterKure 220WB enables most surface treatments to progress with minimal delay. Due to its low viscosity, it is easy to apply, economical in use and very reliable even under difficult application conditions.

  • Suitable for many subsequent surface finishes
  • Aqueous product for indoor application
  • Imparts a harder dust free surface
  • Easy and economical application
  • Reduces labour costs

Direct contact

Ian Ellis

Technical Services Manager

Downloads

MasterKure 220 WB: Safety Data Sheet

pdf (199.43 Kb)

MasterKure 220 WB: Technical Data Sheet

pdf (78.50 Kb)